|
|
12-27-2013, 08:43 AM | #1 |
Lieutenant Colonel
127
Rep 1,799
Posts |
no longer available
I Have A Set Of Rac Rg63 In Hyper Black,excellent condition and no Curb Rash. Looking To Possibly Trade. Let Me Know What Wheels You Have And Would Be Interested In Trading. May be interested in OEM wheels as well. Wheels Have Pilot Ps2 On Them. Sizes are 18x9 ~ 18.5 lbs 18x10 ~ 20 lbs Last edited by SakM_5; 12-29-2013 at 08:22 PM.. |
12-28-2013, 08:54 AM | #5 |
Lieutenant Colonel
127
Rep 1,799
Posts |
just found this in an old thread:
* Wheels have a 72.6mm center hub bore so they are HUBCENTRIC (the fit is perfect, no centering rings needed) * Can accommodate any 365mm or smaller BIG BRAKE KIT without spacers * Can accommodate tire sizes up to a 265F/295R. * Wheels will accept the OEM roundel centercap. * The wheels are forged in Japan at one of the finest manufacturing plants in the world, and normally take 30 days just to clear U.S. customs. * The RG63 wheel exceeds all JWL & VIA wheel certifications |
Appreciate
0
|
12-28-2013, 09:21 AM | #6 |
Major General
592
Rep 5,396
Posts |
Not to kill your deal but these were made specifically for the e46 m3, so the offsets and clearances don't necessarily apply to the e9x m3 as the front offsets on both cars are very different.
Iirc the offset on the Rac in the front is something like et35 or so |
Appreciate
0
|
12-28-2013, 09:33 AM | #7 |
Lieutenant Colonel
127
Rep 1,799
Posts |
Alright, well i have them on an e90 with 15mm spacers in the front. They will fit any e9x m3 perfectly as long as you run the spacers in the front. I'm not sure about the brembo brakes.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|