Anyone Oem Exhaust Mod In Nj???

[retrojay2345]

Anyone know of any shops that do the oem exhaust mod in nj and how much?

[BMWNORTHAMERICA]

Originally Posted by retrojay2345

Anyone know of any shops that do the oem exhaust mod in nj and how much?

AUTOcouture Motoring
15-01 Pollitt Dr #6, Fair Lawn, NJ 07410

One of the best in the country for sure. I have the ACM exhaust mod and I love it. Ask for Matt.

[Powashiftin]

Originally Posted by retrojay2345

Anyone know of any shops that do the oem exhaust mod in nj and how much?

Depends which mod. There is the 4 pipe perforated mod or the straight through (ACM) mod. I have the 4 pipe perforated and got it done at a local muffler shop for $250.

[retrojay2345]

Originally Posted by Powashiftin

Depends which mod. There is the 4 pipe perforated mod or the straight through (ACM) mod. I have the 4 pipe perforated and got it done at a local muffler shop for $250.

Please send me address to where you got it done. How do you like it any videos

[Powashiftin]

Originally Posted by retrojay2345

Please send me address to where you got it done. How do you like it any videos

Honestly, find a video of the 4 pipe mod and go around to your local muffler shops and ask.

As far as videos, search around. There's plenty.

[jeff@autocouture]

We are here and more then happy to help

[motion732]

Although I opted not to go with the OE mod I spoke with the guys at autocouture on the phone and they were extremely helpful and informative.

[retrojay2345]

Originally Posted by jeff@autocouture

We are here and more then happy to help

You guys are great but i can’t see myself paying almost 800 for a stock mod.

[retrojay2345]

Can anyone refer a muffler shop that does this work.

[qbnlykwhoa]

I saved $ and did it at home. Had an angle grinder and welder so took a Saturday to do it.
Not hard if you have the tools to do it.

[BOOF-M3]

Originally Posted by retrojay2345

You guys are great but i canÂ’t see myself paying almost 800 for a stock mod.

$800??? Wow, took my guy less than 4 hours from start to finish never having done it before. He said next time would take him 2 hours from removal to install and $200. Any exhaust shop can do it. Just show them one of the many DIY YouTube videos.

[furry]

I would actually consider selling my acm mode exhaust if I could find a used megan muffler to replace it with. I have Test pipes and heard megan is a better combo with them.

[Powashiftin]

I took a decent video of my OEM 4 pipe plus test pipes but don't know how to load it. If anyone wants to hear, LMK. Or if someone can show me how to post a video I'd be more than happy to do so.

[jeff@autocouture]

Originally Posted by BOOF-M3

$800??? Wow, took my guy less than 4 hours from start to finish never having done it before. He said next time would take him 2 hours from removal to install and $200. Any exhaust shop can do it. Just show them one of the many DIY YouTube videos.

with exhaust tips welded on as well....

[BOOF-M3]

Originally Posted by jeff@autocouture

with exhaust tips welded on as well....

All the respect in the world for you guys at Autocouture. I know many of your clients and they rave about you guys. I did not have tips welded on and I do not believe he had mentioned that in his post. Also, I'm located in Florida so hourly mechanic fees are a bit lower than the tri state area.

[jeff@autocouture]

Originally Posted by BOOF-M3

All the respect in the world for you guys at Autocouture. I know many of your clients and they rave about you guys. I did not have tips welded on and I do not believe he had mentioned that in his post. Also, I'm located in Florida so hourly mechanic fees are a bit lower than the tri state area.

Ahhh gotcha gotcha, thanks for the love!


I know it can get expensive to do but between the standard we have for the core's we take in, every single one gets painted over the welds and full briefcase for protection + cosmetics. You aren't wrong when it comes to state by state comparison of $$$/HR as well. Doesn't help Tri-State is one of the highest in the country.

[retrojay2345]

Originally Posted by jeff@autocouture

Ahhh gotcha gotcha, thanks for the love!


I know it can get expensive to do but between the standard we have for the core's we take in, every single one gets painted over the welds and full briefcase for protection + cosmetics. You aren't wrong when it comes to state by state comparison of $$$/HR as well. Doesn't help Tri-State is one of the highest in the country.

i THOUGHT you said it was $800 without new tips? So how much is it if i dont want new tips?

[ard5040]

Give Matt a call at ZNM Performance in Pompton Lakes. I believe he quoted me $250 before I bought a Remus Sport. They do excellent work and rates are VERY reasonable.