OEM Exhaust measurement needed

[RowanBuds]

Can anyone give me a head to toe measurement on the OEM exhaust system from the downpipe outlet back to the tips?

I'm getting the AWE exhaust put on my car when it gets here but want to leave the OEM in one piece (One Piece!!??) if possible. Trying to get a bearing on the overall length to be sure I can both transport it home in my suv and then also be sure I can store it at home.

Your time is appreciated.

RB

[hotrod2448]

Measure from about the back edge of the front wheel opening to the back of your car. That's about how long it is. I would be very surprised if it fits in an SUV in one piece unless you are driving this:


Have them take it apart, it will be easier to remove from the car and store that way anyway.

[JTO24]

Originally Posted by RowanBuds

Can anyone give me a head to toe measurement on the OEM exhaust system from the downpipe outlet back to the tips?

I'm getting the AWE exhaust put on my car when it gets here but want to leave the OEM in one piece (One Piece!!??) if possible. Trying to get a bearing on the overall length to be sure I can both transport it home in my suv and then also be sure I can store it at home.

Your time is appreciated.

RB

I'll be at ACM on Friday and last time I was there a month ago they had some full f80 exhausts lying around. I'll see if I can get a measurement for ya.

[KingsleySmith]

131 inches long and the can is 34 inches wide.

K

[RowanBuds]

Originally Posted by KingsleySmith

131 inches long and the can is 34 inches wide.

K

Originally Posted by JTO24

I'll be at ACM on Friday and last time I was there a month ago they had some full f80 exhausts lying around. I'll see if I can get a measurement for ya.

Thank you both. I appreciate the measurement - I'll now have to see if it will fit in my truck. If not I have a friend with an Expedition that certainly should fit this.

JTO24 I might stop by ACM to see your TB car Friday- any idea what your ETA is yet?

Wish my damn car was here, but I digress.

[JTO24]

Originally Posted by RowanBuds

Thank you both. I appreciate the measurement - I'll now have to see if it will fit in my truck. If not I have a friend with an Expedition that certainly should fit this.

JTO24 I might stop by ACM to see your TB car Friday- any idea what your ETA is yet?

Wish my damn car was here, but I digress.

No problem! I'm going to be there at 12 noon and will probably be there for an hour at most. Come on up and check her out.. hopefully it's sunny so you can get a better idea of the color.

[RowanBuds]

Originally Posted by JTO24

No problem! I'm going to be there at 12 noon and will probably be there for an hour at most. Come on up and check her out.. hopefully it's sunny so you can get a better idea of the color.

I was considering TB for my order and searched out a few 6er's in the color. It's lovely, just wasn't exactly my preferred blue. I'm looking forward to seeing the color in the metal on the F80 body though. Hopefully our timing works out.