[mike1234]

Hi,

With my 6WB clocks when my fuel tank is full the miles renaming bar below the speedo is not as per my attached image.

Is this a coding issue or is everyone else like this?

Thanks in advance

[atzebmw]

The end stop of the miles remaining bar below is set to 500miles.
But because of your current average consumption, the range is only 371miles.
You could now change your average consumption so that the calculation of the remaining range is 500miles or you change the setting of the end stop to 370miles and the bar will be full.

The end stop miles remaining can be set by

BC_ANSCHLAG_REICHWEITE_MLS