06-23-2020, 04:35 PM | #1 |
Private
17
Rep 87
Posts |
F30 Powerfold mirrors retrofit
Hello, everyone, hope your all well and keeping safe.
Just wanted to share I have finally got round to doing the powerfold mirrors. I couldn't really find an in depth write up on this. After much searching on the internet and on forums etc, I decided to bite the bullet and purchase the powerfold mirrors and drivers door switch. I also brought the genuine bmw plug pins and wires. I removed both door cards, then removed the mirrors from the door. I installed the new powerfold mirrors, put in new switch on drivers side and put drivers side panel back on, job done. Passenger side I checked to make sure wiring was correct following YouTube video, which it was, so put everything back together. I coded the mirrors with bimmercode and vola they worked perfect. So just to clarify my vehicle has electric memory seats which I believe means the wiring is all there for the powerfold mirrors. So if any other members etc want to retrofit and have electric memory seats the wiring is all there ready, install your new mirrors, fit new switch to drivers side, code the vehicle and your done. If anybody wants to know anything drop me a message. |
Post Reply |
Bookmarks |
|
|