10-08-2015, 08:32 AM | #1 |
Second Lieutenant
37
Rep 243
Posts |
EWG Specific Board
Anyone using the EWG specific board and achieving 20+ psi? If so can I see some logs or even pictures of logs achieving this.
Remember the EWG specific board has NO POWER/Ground wire.
__________________
JB4 Stage 2 | aFe Magnum FORCE Intake System DRY | ER Chargepipe | ER CATLESS Downpipe | ATM Intercooler | BMS 2.3 Gal Meth Inj kit | Bilstein B14 | OEM Slotted/Dimpeled front rotors | Cool Carbon brakes | Go Fast Bit DV+ | Pure Stage 2 Turbo | Pure inlet
|
10-08-2015, 01:28 PM | #2 |
BimmerPost Supporting Vendor
24198
Rep 190,807
Posts |
Even if you are using the EWG board , you still need the EWG wires for high boost control
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
Appreciate
0
|
10-08-2015, 01:44 PM | #3 |
Second Lieutenant
37
Rep 243
Posts |
Yes. All wires included, EWG harness, Flex fuel, and meth. So anyone boosting over 20 with EWG specific board?
__________________
JB4 Stage 2 | aFe Magnum FORCE Intake System DRY | ER Chargepipe | ER CATLESS Downpipe | ATM Intercooler | BMS 2.3 Gal Meth Inj kit | Bilstein B14 | OEM Slotted/Dimpeled front rotors | Cool Carbon brakes | Go Fast Bit DV+ | Pure Stage 2 Turbo | Pure inlet
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|