FS Dinantronics Performance Tuner

[mdrobc13]

BIMMERPOST / Classifieds

Asking Price:

USD 800.00

Location:

✓ Will Ship

Item Interest

Okay after numerous inquires if I had anything else to sell I've decided to go ahead and let this last piece go from my F06 650ix Gran Coupe. Yes I hear the cheers! LOL This includes the full working Dinantronics ECU and wiring harness for their BMW V8 engines (includes the 550, 650, and M5 and M6 engines). My shop has checked with Dinan and the ECU can be reused by any new owner. Any Dinan authorized dealer/shop needs to just send the ECU back to DINAN to be reset and cleared. It can then been coded to their vehicle's VIN and software loaded for their particular car. New owner just would need to pay the cost of install and software of course (saves about $500 off the price of ECU and another $300+ on the Harness/wiring and mounts from their package per Dinan costs. ("the Dinan 650Xi ECU for the M3. So there are 3 components to the GC Dinan software (ECU, 8cyl harness, software). Dinan won’t offer a trade-in for the 8cyl harness for the 6cyl harness you need for the M3, nor the software…but could reuse the Dinan ECU....which would save you some, however we’d have to first send it in to Dinan to have them clear it for use on the M3.") So there are some savings to be had here.

All parts were professionally installed at Matrix Integrated in Portland in Sept 2014 and uninstalled by BMW dealer in Feb 2014 and are in original condition w/out damage or fault. Should work on any 2013+ 5, 6 (N63TU) series BMW to including the M6 (S63TU) as the tune is software specific. Check M5/M6 fitment.

Dinan Stage 1 Dinatronics Performance Tuner D440-1634-ST1
http://www.dinancars.com/product/d44...ries&mid=1173/

http://www.dinancars.com/product/d44...ries&mid=1192/

http://www.dinancars.com/product/d44...ries&mid=1172/

http://www.dinancars.com/product/d44...ries&mid=1163/

http://www.dinancars.com/product/d44...ries&mid=1163/

Also can be recoded for the F80/F82/F83 M3 however new v6 harness must be purchased to be used with ECU component. In this case will sell ECU minus harness only for $650.

PM me your interest/questions.