BMW E60 5-Series Forum |  
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read  

Go Back   BMW E60 5-Series Forum | > BMW 5-Series (E60) Forums (2004 - 2009) > General 5-series (E60) Forum

Post Reply
Thread Tools Search this Thread
      11-16-2019, 04:57 PM   #1
New Member

Drives: BMW 530I
Join Date: Nov 2019
Location: Crane, Mo

iTrader: (0)

E60 tranny won't engage after service

07 530i

Trans faulted a cleared codes, trans wouldn't go into gear, rpms would change with each gear selected but no movement. Drained fluid ( was about 1 1/2 quarts low) replaced solenoids in mechatronic, new bridge seal, new mechatronic sleeve, new pan, new fluid. With vehicle on jackstands, tires still won't turn, rpms change still as you shift but no movement. Any ideas?? I have a Foxwell scanner btw, so can check all the variables, I just don't know what they should be, don't have a manual.
Appreciate 0
Post Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -5. The time now is 04:13 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.,,,,,,,,, logo and trademark are properties of BIMMERPOST