AC Basic (LCI) to AC High (LCI) change

[jkchris]

Hallo,
I did change the panel form basic to high like it was writen on another forum.

http://5series.net/forums/diy-do-yourself-14/ac-basic-ac-high-retrofit-diy-rev-3-a-117450/

But this is topic for preLCI
In internet there are only topics of changing panel in preLCI .

In my basic LCI panel i have 2 more wires
After moving all wires from 18pin to 26 pin plug I still have to wires left in the 18 pin plug

pin 2 = yellow red
pin 5 = white green

Does anyone know what could be the cable with pin # 2 of the 18 pin plug? (panel basic lci)

I did changing by schematics schematics of change

But where should I plug the red yellow wire previously at pin 2?


Best regards
jkchris