Anyone Figure Out How to Remove Sticky Residue

TXSTYLE · 09-11-2019, 11:45 AM

So my nice camera that was stored away in a camera bag for over a year, I go to pull it out and the entire grip surface area is sticky AF!

A quick Google search shows this to be a common problem. The grips essentially break down. I've tried 90% alcohol to no avail.

Any successful suggestions in removing this is much appreciated.

Marcus

tracer bullet · 09-11-2019, 01:22 PM

If it is breaking down it is unlikely for something to just remove the surface as the whole thing is affected.

Alcohol affects some plastics, after that you have to delve into acetone (fingernail polish remover), or toluene or xylene (carb cleaner, brake disc cleaner, etc.). You may clean off a surface layer, or may just make things worse...

Not sure if that helps. Best bet would be to replace the grips if possible. Maybe someone has already tackled this.

Hawkeye · 09-11-2019, 01:25 PM

I thought this thread was going in a different direction...

TXSTYLE · 09-11-2019, 03:46 PM

Quote:

Originally Posted by tracer bullet

If it is breaking down it is unlikely for something to just remove the surface as the whole thing is affected.

Alcohol affects some plastics, after that you have to delve into acetone (fingernail polish remover), or toluene or xylene (carb cleaner, brake disc cleaner, etc.). You may clean off a surface layer, or may just make things worse...

Not sure if that helps. Best bet would be to replace the grips if possible. Maybe someone has already tackled this.

Thanks for the response.

Run Silent · 09-11-2019, 03:51 PM

In all my years, I've never had a single item that this stuff didn't work on. I swear by it.

If you are looking to have the sticky stuff corrected and re-coated - these guys are top notch. They did some of the sticky buttons on my 360. They primarily deal with exotic cars, but will do anything if you call them for a quote.

https://stickynomore.com/

BS_CS · 09-11-2019, 04:23 PM

Sticky residue eh?

I use Goo Gone like Run Silent does too. Helped me in a lot of sticky situations. .........

Hawkeye · 09-12-2019, 03:20 PM

Yeah, I have to say that I am also a fan of goo gone, but not sure about it based on the description of your situation TX

tracer bullet · 09-13-2019, 08:22 AM

Yeah, maybe. That goo gone is kind of oily and with some actual citric cleaner in it plus a little extra citrus to give it a smell boost. It could work, but is usually best for getting off stickers and such. I'd be concerned it would soak into the grip and stay sticky and orange smelling afterwards. However it could work spectacularly well, hard to say for sure without trying.

I'm wondering, since it's rubber, aka oil based, would dish soap be enough? I'd probably start there, then move to alcohol, then acetone. Though you said you already tried alcohol... It does evaporate quickly, there's a chance it could work if allowed to stay on a touch longer.

We're all just guessing unfortunately.

TXSTYLE · 09-13-2019, 10:52 AM

Quote:

Originally Posted by tracer bullet

Yeah, maybe. That goo gone is kind of oily and with some actual citric cleaner in it plus a little extra citrus to give it a smell boost. It could work, but is usually best for getting off stickers and such. I'd be concerned it would soak into the grip and stay sticky and orange smelling afterwards. However it could work spectacularly well, hard to say for sure without trying.

I'm wondering, since it's rubber, aka oil based, would dish soap be enough? I'd probably start there, then move to alcohol, then acetone. Though you said you already tried alcohol... It does evaporate quickly, there's a chance it could work if allowed to stay on a touch longer.

We're all just guessing unfortunately.

I actually have some and that shit works fantastic on removing the toughest 'road grime' from paint: like all around the bottom of your car behind the front and rear tires that splatter up on the paint.

But I would NOT consider using it on a camera.

I have contacted the manufacturer and they agreed to offer me a discounted price on a newer replacement.

King Rudi · 09-13-2019, 11:09 AM

Quote:

Originally Posted by Hawkeye

I thought this thread was going in a different direction...

Same. I was going to suggest more of a......water-based....."product" along with some mild soap and water.

Another fan of Goo Gone and Goof Off as well.

Also, Edwal Film Cleaning Solution on a damp rag should do the trick. I ran into this problem a few years ago with a Canon.

https://www.amazon.com/Edwal-Anti-St...ustomerReviews

bobowar135 · 11-18-2019, 06:29 AM

If you guys can get hold of pure Eucalyptus or Tea-Tree oil, they work a treat on sticky stuff.

09-11-2019, 11:45 AM	#1
TXSTYLE "Salud" 14876 Rep 4,856 Posts Drives: F01 & F15 / Mineral White Join Date: May 2013 Location: The GYM! (The Burbs - N TX) iTrader: (0)	Anyone Figure Out How to Remove Sticky Residue So my nice camera that was stored away in a camera bag for over a year, I go to pull it out and the entire grip surface area is sticky AF! A quick Google search shows this to be a common problem. The grips essentially break down. I've tried 90% alcohol to no avail. Any successful suggestions in removing this is much appreciated. Marcus
	Appreciate 0 Tweet Quote

09-11-2019, 01:22 PM	#2
tracer bullet Brigadier General 3667 Rep 4,210 Posts Drives: '25 Z4, '15 X3 35i (135i sold) Join Date: May 2011 Location: Saint Paul, MN iTrader: (1)	If it is breaking down it is unlikely for something to just remove the surface as the whole thing is affected. Alcohol affects some plastics, after that you have to delve into acetone (fingernail polish remover), or toluene or xylene (carb cleaner, brake disc cleaner, etc.). You may clean off a surface layer, or may just make things worse... Not sure if that helps. Best bet would be to replace the grips if possible. Maybe someone has already tackled this.
	Appreciate 1 TXSTYLE14876.00 Quote

09-11-2019, 01:25 PM	#3
Hawkeye Brigadier General 2063 Rep 4,365 Posts Drives: '07 Z4 Coupe, '21 X3, '16 GMC Join Date: Aug 2007 Location: Iowa iTrader: (0) Garage List 2016 GMC Sierra SLT [10.00] 2008 Yamaha R6 [9.00]	I thought this thread was going in a different direction... __________________ 2007 Z4 3.0si Coupe • 6 MT • Black Saphire Metallic • PP • SP 2016 GMC Sierra SLT Z71 Premium Plus 4x4 2017 Harley StreetGlide • Denim Black • V&H Tune 2021 BMW x30i • Phytonic Blue Metallic • Fully loaded
	Appreciate 2 Violator4591.50 King Rudi13070.50 Quote

09-11-2019, 03:51 PM	#5
Run Silent Run Deep 15087 Rep 4,123 Posts Drives: Back and Forth To Work Join Date: Mar 2017 Location: The Mountains iTrader: (0) Garage List 2018 Alfa Romeo Giu ... [0.00] 2022 Ford Bronco 2d ... [0.00] 2016 Alfa Romeo 4C [8.50] 2019 BMW i8 Roadster [10.00]	In all my years, I've never had a single item that this stuff didn't work on. I swear by it. If you are looking to have the sticky stuff corrected and re-coated - these guys are top notch. They did some of the sticky buttons on my 360. They primarily deal with exotic cars, but will do anything if you call them for a quote. https://stickynomore.com/ __________________ *Don't sweat petty things....or pet sweaty things.*
	Appreciate 2 TXSTYLE14876.00 King Rudi13070.50 Quote

09-11-2019, 04:23 PM	#6
BS_CS No Armrest club 319 Rep 198 Posts Drives: 2018 BMW M3 CS / 2014 BMW X5 Join Date: Jul 2011 Location: San Diego iTrader: (0)	Sticky residue eh? I use Goo Gone like Run Silent does too. Helped me in a lot of sticky situations. ......... __________________ - 2018 BMW M3 CS - 2014 BMW X5 50i
	Appreciate 3 TXSTYLE14876.00 Run Silent15086.50 King Rudi13070.50 Quote

09-12-2019, 03:20 PM	#7
Hawkeye Brigadier General 2063 Rep 4,365 Posts Drives: '07 Z4 Coupe, '21 X3, '16 GMC Join Date: Aug 2007 Location: Iowa iTrader: (0) Garage List 2016 GMC Sierra SLT [10.00] 2008 Yamaha R6 [9.00]	Yeah, I have to say that I am also a fan of goo gone, but not sure about it based on the description of your situation TX __________________ 2007 Z4 3.0si Coupe • 6 MT • Black Saphire Metallic • PP • SP 2016 GMC Sierra SLT Z71 Premium Plus 4x4 2017 Harley StreetGlide • Denim Black • V&H Tune 2021 BMW x30i • Phytonic Blue Metallic • Fully loaded
	Appreciate 1 TXSTYLE14876.00 Quote

09-13-2019, 08:22 AM	#8
tracer bullet Brigadier General 3667 Rep 4,210 Posts Drives: '25 Z4, '15 X3 35i (135i sold) Join Date: May 2011 Location: Saint Paul, MN iTrader: (1)	Yeah, maybe. That goo gone is kind of oily and with some actual citric cleaner in it plus a little extra citrus to give it a smell boost. It could work, but is usually best for getting off stickers and such. I'd be concerned it would soak into the grip and stay sticky and orange smelling afterwards. However it could work spectacularly well, hard to say for sure without trying. I'm wondering, since it's rubber, aka oil based, would dish soap be enough? I'd probably start there, then move to alcohol, then acetone. Though you said you already tried alcohol... It does evaporate quickly, there's a chance it could work if allowed to stay on a touch longer. We're all just guessing unfortunately.
	Appreciate 1 TXSTYLE14876.00 Quote

11-18-2019, 06:29 AM	#11
bobowar135 Second Lieutenant 3462 Rep 208 Posts Drives: 08' Sedona Red 135i Join Date: Jun 2019 Location: Broken down again iTrader: (0)	If you guys can get hold of pure Eucalyptus or Tea-Tree oil, they work a treat on sticky stuff.
	Appreciate 0 Quote