BMW E60 5-Series Forum | 5Post.com  
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read  

Go Back   BMW E60 5-Series Forum | 5Post.com > BMW 5-Series (E60) Forums (2004 - 2009) > General 5-series and M5 (E60) Forum

Post Reply
 
Thread Tools Search this Thread
      01-01-2021, 04:00 PM   #1
bimmerer5
Registered
0
Rep
4
Posts

Drives: BMW 530d E60
Join Date: Jan 2021
Location: Budapest

iTrader: (0)

BMW E60 530D M57 rail pressure problem , need help pls.

Hi everyone ,
I am struggling with the following issue : After changing the timing on my car, at first start the car cranks, but wont start.

Using ISTA + diag I can see that there are no errors that could alter starting. On live data monitoring I see that during cranking the fuel pressure in the rail system does not reach the 400bar necessary for start. it goes up to 120bar and immediately fall back to around 50, 60, 70 , 80 bar. ( the rail valves: pressure and pressure control valve are both working )

When powering the volume control valve on the high pressure pump from a separate 12V supply , a click can be heard , and the engine starts immediately.

there are no leaks in the rail system .

Maybe the wiring between DDE and the control valve will be the problem? On red wire I can measure 12V and the second one seems to be the ground. :unsure:

Any help would be appreciated.
thanks
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:39 AM.




5post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST