Help me purchase a wheel lock key adapter

Axius · 03-14-2016, 12:14 PM

I lost my wheel key when I drove away for a test drive. Shut up. Don't want to hear it.

So the box to my normal studs has the numbers "36 13 6 764 057". This leads me to believe that I have a 36 series 17mm stud, can someone confirm this for me?

I attached a snapshot from realoem listing all the adapter codes and I don't see how it could be anything other than 36 since none of the other numbers match up.

Thanks for any assistance!

Mr Tonka · 03-14-2016, 12:15 PM

This one should keep it safe.

Axius · 03-14-2016, 12:19 PM

You're not helping you dinkus!

jwzimm · 03-14-2016, 12:51 PM

Quote:

Originally Posted by Axius

I lost my wheel key when I drove away for a test drive. Shut up. Don't want to hear it.

So the box to my normal studs has the numbers "36 13 6 764 057". This leads me to believe that I have a 36 series 17mm stud, can someone confirm this for me?

I attached a snapshot from realoem listing all the adapter codes and I don't see how it could be anything other than 36 since none of the other numbers match up.

Thanks for any assistance!

Note that ALL of the P/N's you can see in your realoem snap start with "36". That is the base part number for the wheel locks. It is not the code.

Edit: I just searched on Google for your P/N (36 13 6 764 057). You have the old style wheel locks. You will need to look through the documents in the box the locks came from to find the code card.

Axius · 03-14-2016, 12:55 PM

Quote:

Originally Posted by jwzimm

Note that ALL of the P/N's you can see in your realoem snap start with "36". That is the base part number for the wheel locks. It is not the code. Which type of wheel lock do you have? Is it the McGard type with a squiggle in the center of the bolt or is it the old BMW style with a kind of star pattern with a center pin? If it is the old BMW style there is only one key. If it the McGard one you will need to find the correct code.

Thanks, definitely didn't notice that.

It basically looks like a spline gear. The center of the stud is has a 20 some tooth fine-ish spline, and the adapter has the matching spline teeth. BMW stealership said I should have a card somewhere that denotes the code, but I'll have to check manuals and stuff to find the card.

Mr Tonka · 03-14-2016, 02:27 PM

Quote:

Originally Posted by Axius

Thanks, definitely didn't notice that.

It basically looks like a spline gear. The center of the stud is has a 20 some tooth fine-ish spline, and the adapter has the matching spline teeth. BMW stealership said I should have a card somewhere that denotes the code, but I'll have to check manuals and stuff to find the card.

What's the code?

Mywifes335 · 03-14-2016, 03:05 PM

Honestly wheel locks don't work.

Hammer a slightly smaller sized socket onto the lock and use an impact driver. Lock defeated.

Trust me, I know.

overcoil · 03-14-2016, 03:09 PM

Not that I would bang a socket on to a mounted lug, but either Jalopnik or Autoblog in the past few weeks had a video entry on how to socket the lock of the stud.

http://thegarage.jalopnik.com/how-to...key-1759207243

Axius · 03-14-2016, 03:42 PM

Quote:

Originally Posted by Mr Tonka

What's the code?

37 is mine. Card inside the stud box.

Quote:

Originally Posted by Mywifes335

Honestly wheel locks don't work.

Hammer a slightly smaller sized socket onto the lock and use an impact driver. Lock defeated.

Trust me, I know.

I'm just going to buy a new lock key and swap them out with regular lugs that are in the trunk. Should have done it before, but hindsight is 75/75.

1MOREMOD · 03-14-2016, 04:08 PM

Put it on cinder blocks at night. Confuse em.

Axius · 03-14-2016, 04:18 PM

Found one online, $16 shipped from ECS. Should be here in 3 days.

Now just wait for another thread when I do it all over again.

Mr Tonka · 03-14-2016, 04:30 PM

Quote:

Originally Posted by Axius

Found one online, $16 shipped from ECS. Should be here in 3 days.

Now just wait for another thread when I do it all over again.

Sweet, they said mine would be here in 2 days. One day to drive up there... gonna be tight.

Mywifes335 · 03-14-2016, 04:31 PM

Quote:

Originally Posted by 1MOREMOD

Put it on cinder blocks at night. Confuse em.

Increases property value too!

Mywifes335 · 03-14-2016, 04:32 PM

Quote:

Originally Posted by Axius

Found one online, $16 shipped from ECS. Should be here in 3 days.

Now just wait for another thread when I do it all over again.

Cool, in the meantime gonna jack your wheels. Lol!

jgoens · 03-14-2016, 04:33 PM

Quote:

Originally Posted by Axius

I lost my wheel key when I drove away for a test drive. Shut up. Don't want to hear it.

So, why did you lose it when you went for a test drive?

Mr Tonka · 03-14-2016, 04:36 PM

Quote:

Originally Posted by jgoens

So, why did you lose it when you went for a test drive?

THIS is a good question. Ask him how he lost the first one too.

Axius · 03-14-2016, 04:40 PM

Quote:

Originally Posted by Mr Tonka

Sweet, they said mine would be here in 2 days. One day to drive up there... gonna be tight.

Pretty sure if someone steals my wheels, my insurance company is going to drop me when I make a claim.

Quote:

Originally Posted by Mywifes335

Cool, in the meantime gonna jack your wheels. Lol!

Do it pussy! I dare ya!

Quote:

Originally Posted by jgoens

So, why did you lose it when you went for a test drive?

First one I left on the stud after tightening down and drove off. This time, my neighbor commented on me leaving it on there and how it'd suck, so I know for a fact that I took it off, I just have no idea where I put the damn thing.

1LRM3 · 03-14-2016, 05:58 PM

Quote:

Originally Posted by Axius

Found one online, $16 shipped from ECS. Should be here in 3 days.

Now just wait for another thread when I do it all over again.

Not permitted to repeat without unsolicited flaming. Glad you finally found one. Keep it in plastic like your other socket.

1LRM3 · 03-14-2016, 06:00 PM

Quote:

Originally Posted by Axius

I just have no idea where I put the damn thing.

So..... Seems to be a common theme.

:

atinybug · 03-14-2016, 06:38 PM

I lost my wheel lock a while back and I ended up going to the dealer to get it replaced. They have this little box with all the different wheel locks that ever came on any BMW built to see which one would fit. They didn't have an extra of mine in stock so I had to order it. Ended up costing me $15 and it arrived 2 days later.

Axius · 03-14-2016, 07:57 PM

Quote:

Originally Posted by 1LRM3

So..... Seems to be a common theme.

:

Poor life choices equal poor memory function.

Verbiage · 03-14-2016, 08:57 PM

Did you find your answer OP?

03-14-2016, 12:14 PM	#1
Axius Banned 4202 Rep 216 Posts Drives: 612 Scaglietti Join Date: Sep 2015 Location: Watch Me NayNay iTrader: (0)	Help me purchase a wheel lock key adapter I lost my wheel key when I drove away for a test drive. Shut up. Don't want to hear it. So the box to my normal studs has the numbers "36 13 6 764 057". This leads me to believe that I have a 36 series 17mm stud, can someone confirm this for me? I attached a snapshot from realoem listing all the adapter codes and I don't see how it could be anything other than 36 since none of the other numbers match up. Thanks for any assistance! Attached Images
	Appreciate 1 Tweet Quote

03-14-2016, 12:15 PM	#2
Mr Tonka is probably out riding. 6058 Rep 2,292 Posts Drives: Something Italian Join Date: Feb 2009 Location: Sweatypeninsula iTrader: (0)	This one should keep it safe. __________________ "There is no greater tyranny than that which is perpetrated under the shield of the law and in the name of justice. -Charles de Secondat"
	Appreciate 0 Quote

03-14-2016, 12:19 PM	#3
Axius Banned 4202 Rep 216 Posts Drives: 612 Scaglietti Join Date: Sep 2015 Location: Watch Me NayNay iTrader: (0)	You're not helping you dinkus!
	Appreciate 0 Quote

03-14-2016, 03:05 PM	#7
Mywifes335 Major 1631 Rep 1,422 Posts Drives: 2014 FBO M235i Join Date: Oct 2010 Location: DFW iTrader: (1)	Honestly wheel locks don't work. Hammer a slightly smaller sized socket onto the lock and use an impact driver. Lock defeated. Trust me, I know.
	Appreciate 0 Quote

03-14-2016, 03:09 PM	#8
overcoil Major General 3074 Rep 5,577 Posts Drives: M235i 6spd Join Date: Dec 2013 Location: Mid-Atlantic iTrader: (0)	Not that I would bang a socket on to a mounted lug, but either Jalopnik or Autoblog in the past few weeks had a video entry on how to socket the lock of the stud. http://thegarage.jalopnik.com/how-to...key-1759207243
	Appreciate 0 Quote

03-14-2016, 04:08 PM	#10
1MOREMOD - 11817 Rep 23,187 Posts Drives: Race car-> Join Date: Mar 2009 Location: check your mirrors iTrader: (5)	Put it on cinder blocks at night. Confuse em.
	Appreciate 0 Quote

03-14-2016, 04:18 PM	#11
Axius Banned 4202 Rep 216 Posts Drives: 612 Scaglietti Join Date: Sep 2015 Location: Watch Me NayNay iTrader: (0)	Found one online, $16 shipped from ECS. Should be here in 3 days. Now just wait for another thread when I do it all over again.
	Appreciate 1 Quote

03-14-2016, 06:38 PM	#20
atinybug First Lieutenant 78 Rep 375 Posts Drives: 07 e92 335i 6mt Join Date: Oct 2013 Location: Atlanta iTrader: (0)	I lost my wheel lock a while back and I ended up going to the dealer to get it replaced. They have this little box with all the different wheel locks that ever came on any BMW built to see which one would fit. They didn't have an extra of mine in stock so I had to order it. Ended up costing me $15 and it arrived 2 days later.
	Appreciate 0 Quote

03-14-2016, 08:57 PM	#22
Verbiage Dismembered Member 3583 Rep 9,213 Posts Drives: F80 ZCP 6MT, R55 Clubman S 6MT Join Date: Jan 2010 Location: DMV iTrader: (6)	Did you find your answer OP? __________________ My delivery experience and beach photoshoot here.
	Appreciate 0 Quote