BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
06-26-2019, 09:51 AM | #1 |
Lieutenant
173
Rep 545
Posts |
Fuel Pressure problems
My dad has a 2010 E60 535xi with the MHD Stage 1 tune on it. Its been having some fuel pressure problems lately. In the past few weeks, the car will completely shut off on him while driving around town. He's able to start right back up again like nothing was wrong. I had him pull the codes and he had the following.
Active: 29DC- DME; Cylinder Injection Cutout 29F2- DME; Fuel High pressure System, Fuel pressure Shadow: 2AAE- DMW; Fuel Pump 2FCA- Fuel High Pressure ( followed by a bunch of german) 2FDA- Fuel High Pressure ( followed by a bunch of german) 2FDB- Fuel High Pressure ( followed by a bunch of german) I had him do a 3rd gear pull (he did it in 2nd by accident) and heres the data he sent me https://datazap.me/u/ryansbmw/2010-5...g=0&data=11-20 Im going to have him do a few more pulls in 3rd gear and make sure the results are consistent but does anyone have a clue as to what the problem may be? The codes point to HPFP but the data shows the pressure to be fine. Im looking at the the LPFP and the lull it goes thru between 3800 and 6000rpm but I'm not sure how its supposed to act. |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|