Post a picture of the Last item you made

[bosstones]

Originally Posted by spazzyfry123

Is the outlet flip a standard of some sorts? I've never seen that before, but damn if it doesn't make sense!

Around me, builders put a small dot on the outlet to indicate which is tied to a switch. Not too big to be distracting but easy to find if you are looking.

[Fast.F10]

Always wanted some Volks. Resin printed for a keychain. Now to pick colors to alcohol ink.

[Lady Jane]

Does this count?Attachment 2518599


Attachment 2518598

[DETRoadster]

Originally Posted by Lady Jane

Does this count?Attachment 2518599


Attachment 2518598

Damn right it does! Looks amazing. Nice work.

[DETRoadster]

Originally Posted by lsturbointeg

oh, the upside down outlet is to let people know that outlet is on a switch

Is that an actual "thing?" I've encountered a few mysteriously switched outlets in my past 3 houses and it's always pretty much gone like this:

Step 1 - Plug something into outlet and discover it doesn't work
Step 2 - Plug the device into the other 1/2 of the outlet (Like that'll make a difference)
Step 3 - Shake the device you plugged in
Step 4 - Curse
Step 5 - Plug the device into a different outlet to prove it works
Step 6 - Return to the "broken" outlet and try both plugs again with the known good device
Step 7 - Curse
Step 8 - Walk away bewildered
Step 9 - Remember that weird wall switch you found last summer that didnt do anything
Step 10 - Discover the outlet is switched. Tell your wife you've solved the mystery of the switch that does nothing like you're some kind of genius.

[Fast.F10]

Originally Posted by Lady Jane

Does this count?Attachment 2518599


Attachment 2518598

Place a small slit in the middle, stuff some feta cheese in there.......mmmmmmmm Kifli.

[Mein11]

Originally Posted by Lady Jane

Does this count?Attachment 2518599


Attachment 2518598

One of the few windows you can peak through, spying on thick buns, without someone calling the cops!

[///d]

Finally got around to getting the motor dropped into my Datsun. Still gotta clean em up and trim some edges. Not the best looking mounts but they are growing on me since this will be kind of a rat (Ratsun) build. Way overkill lol.

Also, dont judge my welds!

[bmw335ie90]

Welded up a heavy shop table, took longer than expected to get everything squared and the table top to be relatively flat. Added two 4x3" square tubes under the table so a fork lift can grab it, this thing has to be over 1,500 lbs!

[DETRoadster]

Originally Posted by bmw335ie90

Welded up a heavy shop table, took longer than expected to get everything squared and the table top to be relatively flat. Added two 4x3" square tubes under the table so a fork lift can grab it, this thing has to be over 1,500 lbs!

Holy crap! That's a real man's shop table!

[King Rudi]

Originally Posted by bmw335ie90

Welded up a heavy shop table, took longer than expected to get everything squared and the table top to be relatively flat. Added two 4x3" square tubes under the table so a fork lift can grab it, this thing has to be over 1,500 lbs!

F*ck yeah! Well done.

[Lady Jane]

Originally Posted by Fast.F10

Place a small slit in the middle, stuff some feta cheese in there.......mmmmmmmm Kifli.

Thank you. I printed the recipe. Looks yummy!

[Fast.F10]

Originally Posted by Lady Jane

Thank you. I printed the recipe. Looks yummy!

Mother inlaw (Macedonian) made about 500 (no joke) of these for our wedding day...been in love with them ever since. In my freezer right now I have about 50 of them, but with them living about 5mins away from us...fresh is always better .

[Fast.F10]

Been wanting a GoPro Visor mount for a bit...so I made one...WIP. Slides in and locks into place. Need to beef up where it slides onto the visor; snapped it when pressing it into place. Near the glass is more solid than closest to the driver.


Edit: This should be better (rendering image)

[Fast.F10]

Clear resin 3d printed..now Gold M3 E46 keychain. Next to print a larger one and the mirrors/rim spokes should come out proper.

[Lady Jane]

Home made Irish Cream. Lady Jane proof. Not that sissy stuff you buy in store.


Attachment 2525839

[Lady Jane]

Originally Posted by Fast.F10

In my freezer right now I have about 50 of them, .

Do you FedEx? I'd love some for breakfast tomorrow. Just slap an "Organ Transplant" on the cooler and I'll get it just in time.

[DETRoadster]

Originally Posted by Lady Jane

Home made Irish Cream. Lady Jane proof. Not that sissy stuff you buy in store.


Attachment 2525839

Recipe, please!

[Lady Jane]

Originally Posted by DETRoadster

Recipe, please!

That's the one I've been using for some time. I skip the almond extract but add more whiskey.( To taste, of course...)


https://www.allrecipes.com/recipe/23...l-irish-cream/

[DETRoadster]

Originally Posted by Lady Jane

That's the one I've been using for some time. I skip the almond extract but add more whiskey.( To taste, of course...)


https://www.allrecipes.com/recipe/23...l-irish-cream/

Love it, thanks! Making up a batch this weekend seeing as we will be snowed in by tomorrow morning. Seems like a great way to have some fun during a little winter snowstorm.

[Fast.F10]

Originally Posted by Lady Jane

That's the one I've been using for some time. I skip the almond extract but add more whiskey.( To taste, of course...)


https://www.allrecipes.com/recipe/23...l-irish-cream/

Will have to give this a whirl. A co-worker makes/sell Coquito, but I run thru those bottles too fast to buy -vs- make

[Fast.F10]

BMW inspired 3D printed (hefty) desk organizer w/wifi charging. End containers are held in place with pegs with the intention of using glue to secure them. Perfect for small misc items like RJ45 connectors, paper clips, pushpins...and such. Also along the back it has 6 features to hold standard sized bic pens and/or pencils. The slot in the front is for the "///M Performance" insert in white text; to be printed later today.

Print times:
End Caps 7 1/2 hrs ea
Middle 14 1/2 hours