03-09-2018, 04:44 PM | #68 |
Lieutenant
376
Rep 428
Posts |
Today I installed the EBC pads and put on the factory wheels in preparation for my first trackday on Sunday. Also fully extended the lip on the front spoiler.
I'm quite excited to use this machine in full unleashed mode. |
Appreciate
1
chief1richard383.00 |
03-12-2018, 05:54 PM | #69 |
Lieutenant
376
Rep 428
Posts |
So I did my first track day as scheduled. It was really fun to drive this car on a track. I signed up for three sessions because i couldn't stay for the afternoon part longer.
I had to interrupt the first session because my splitter's glue gave up (screws kept it on, my luck ) at high speed, so i left the track and removed it. The second was only 10 minute because some car needed to be towed off from the previous group. The third session was full length and i could improve my pace gradually. I'm far from the limits but i still enjoyed it. It will get better. Here is my video about it. |
Appreciate
1
voyagergab634.00 |
03-12-2018, 05:57 PM | #70 |
Lieutenant
376
Rep 428
Posts |
And some pictures too.
This is a tire over its limits from a drift car. |
Appreciate
2
voyagergab634.00 norberts84.50 |
03-12-2018, 07:52 PM | #71 |
Private First Class
85
Rep 133
Posts
Drives: M2, D5
Join Date: Mar 2015
Location: California
|
I might have missed it in one of your posts but do you have camber plates? if yes what setting?
|
Appreciate
0
|
03-14-2018, 04:46 AM | #74 |
Lieutenant
376
Rep 428
Posts |
I managed to edit my data logs to a good format and uploaded it to Datazap. I had to split it half for size considerations.
You can check the parameters like intake temp with my Wagner Evo Comp. FMIC. Lap 1-2. Lap 3-4. Last edited by Tano; 03-14-2018 at 04:54 AM.. |
Appreciate
1
Speedwell-Industries434.00 |
03-15-2018, 04:46 PM | #75 |
Lieutenant
376
Rep 428
Posts |
Today I swapped back the brake pads for the factory ones for daily driving. This is how my front pads look like after 1 track day. I think it's quite decent.
Also changed the brake hoses to the Goodridge steel lines and the brake fluid to Motul RBF 600. It was an easy but time consuming job. |
Appreciate
0
|
04-21-2018, 04:17 AM | #77 |
Lieutenant
376
Rep 428
Posts |
On April 19th i did my first track day at the Hungaroring. The weather was beautiful the car was great and i enjoyed it very much. This was my first occasion on this track. The brakes kept well i didn't experienced any fade, although there is more margin for shorter brake distances next time. The IAT stayed less than 20C above ambient temp. The only downside was that i had to refuel after the 3rd session.
Here is a short clip from my best laps. |
Appreciate
1
Downunder9955.50 |
05-08-2018, 04:42 PM | #79 |
Lieutenant
376
Rep 428
Posts |
So today i managed to unlock and flash my car with bootmod3. It was an easy job. I fully charged the battery before and kept a charger connected during the process. Everything went fine. I've chosen the stage 1 93 octane map. I intend to use stage 2 after i install the DP. Tomorrow i'll see how it runs.
|
Appreciate
0
|
05-12-2018, 10:52 PM | #81 | |
Major General
5873
Rep 6,638
Posts |
Quote:
|
|
Appreciate
0
|
05-13-2018, 01:56 PM | #82 |
Lieutenant
376
Rep 428
Posts |
|
Appreciate
0
|
05-13-2018, 02:09 PM | #83 |
Private
56
Rep 88
Posts
Drives: 2018 BMW M2 | LBB | MT
Join Date: Mar 2018
Location: Illinois
|
|
Appreciate
0
|
05-13-2018, 02:14 PM | #84 |
Lieutenant
376
Rep 428
Posts |
51142406145
Last edited by Tano; 05-13-2018 at 03:43 PM.. Reason: Ok, i edited it out. It was the link of the realoem ETK webpage. No problem on my PC. |
Appreciate
1
Downunder9955.50 |
05-13-2018, 02:40 PM | #85 |
Private
56
Rep 88
Posts
Drives: 2018 BMW M2 | LBB | MT
Join Date: Mar 2018
Location: Illinois
|
Thank you! Pls note though, that the link leads to a webpage, which starts downloading stuff, means that website is infected with some sort of Malware! For the safety of others using the link, pls just make it the OEM number without the link.
|
Appreciate
0
|
05-13-2018, 03:58 PM | #86 |
Lieutenant
376
Rep 428
Posts |
Today i visited the Euroring for the first time. We had a great day, some good runs, i had a little moment one time. Only problem was that i lost one wheel cap on the track during a session from the left front wheel. Next time i will remove them before.
I will post video later. |
Appreciate
1
Downunder9955.50 |
05-18-2018, 04:23 PM | #87 |
Lieutenant
376
Rep 428
Posts |
Today i removed the exhaust tailpipes to paint them black tomorrow. I will make some pictures.
I created my last track day videos but unfortunately i can't upload them yet due to slow net speed at my present place. Will do when i get back home. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|