BMW E60 5-Series Forum | 5Post.com  
BMW Garage BMW Meets Register Today's Posts  

Go Back   BMW E60 5-Series Forum | 5Post.com > BIMMERPOST Universal Forums > Cosmetic Care & Detailing (PPF/Wash/Wax/Detailing/Restoration/Repairs)

Post Reply
 
Thread Tools Search this Thread
      09-01-2024, 07:09 PM   #1
SnowCover
First Lieutenant
155
Rep
333
Posts

Drives: '23 330i, '23 X1, '25 X3
Join Date: Aug 2024
Location: Monroe

iTrader: (0)

radiator fins covered with dead bugs. is it safe to use pressure washer to clean it?

radiator fins covered with dead bugs. it was very bad because it was after just two hours of interstate driving on a very sunny day last week.

is it safe to use pressure washer to clean it?
Appreciate 0
      09-02-2024, 08:59 AM   #2
disintegrator66
First Lieutenant
disintegrator66's Avatar
United_States
452
Rep
387
Posts

Drives: '18 340i M-Sport 6MT THP MPPSK
Join Date: Mar 2018
Location: MA

iTrader: (0)

I wouldn't recommend it as aluminum fins bend very easily. I'd be cautious and use a garden hose with low pressure nozzle. Hose it down, let it soak for a while and then repeat.
Appreciate 1
      09-02-2024, 09:35 AM   #3
Westside Guy
Major General
Westside Guy's Avatar
7248
Rep
5,226
Posts

Drives: 22 Z4 M40i, 21 228i Retired
Join Date: Sep 2021
Location: Hallandale Beach, FL

iTrader: (0)

Garage List
Quote:
Originally Posted by disintegrator66 View Post
I wouldn't recommend it as aluminum fins bend very easily. I'd be cautious and use a garden hose with low pressure nozzle. Hose it down, let it soak for a while and then repeat.
I totally agree with this approach, better safe than sorry!
Appreciate 0
      09-02-2024, 03:11 PM   #4
grannyknot
Captain
grannyknot's Avatar
1009
Rep
804
Posts

Drives: 2008 Z4M coupe
Join Date: Oct 2021
Location: toronto

iTrader: (0)

You don't have to start with the pressure washer nozzle right up against fins where it definitely bend them, start with the nozzle 3ft away and work towards the rad until you see results.
Shooting down at an angle will help with not driving them deeper into the core, you could also start with a stiff brush see if you can flick most of them out first.
__________________
2008 E86 M coupe
Appreciate 0
      09-03-2024, 10:46 PM   #5
SnowCover
First Lieutenant
155
Rep
333
Posts

Drives: '23 330i, '23 X1, '25 X3
Join Date: Aug 2024
Location: Monroe

iTrader: (0)

Quote:
Originally Posted by grannyknot View Post
You don't have to start with the pressure washer nozzle right up against fins where it definitely bend them, start with the nozzle 3ft away and work towards the rad until you see results.
Shooting down at an angle will help with not driving them deeper into the core, you could also start with a stiff brush see if you can flick most of them out first.

Thanks! I ended up using a dryer attachment on my shop vac. It's think and meant to go inside the lint tray opening of dryers to suck up link. It worked great and I managed to get almost all of the bugs out. It also helped that I didn't do this right away. A couple of days of driving and the heat from the radiator basically toasted them dry and crispy, which made it easy to vacuum them out.

Edit: I'm keeping this one in the garage and not going to reuse it in the clothes dryer again, obviously.

like this one:

https://www.amazon.com/Holikme-Attac.../dp/B089Q4QHTF
Attached Images
 

Last edited by SnowCover; 09-04-2024 at 11:36 AM..
Appreciate 1
grannyknot1008.50
Post Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 01:11 AM.




5post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST