Need Help! Crank but not Start!

[iskoT]

Hello Guys,
I have 2007 Bmw 5.30xxi (E60). .
It had Red ELV warning before and I reseted ELV so I was using almost 1 years with yellow warning sign.
I was travelling and this car was sitting for 9 months. Battery was death and replaced with the new one. It was lead acid 110 battery but I replaced with new AMG 92. I registered new battery. it was all fine.

I drove and parked car, and after 2-3 minutes, car didn't start. so I had to reset ELV again but this time, whenever I stop the car, I had reset ELV to turn on the engine. I used second key to leave the key inserted after car stopped. so this way I didn't need to reset ELV.

But this time, I got

"Ignition malfunction

It may only be possible to start engine with brake or clutch pedal depressed. Please contact the nearest BMW center.". One of the key does not turn on IGNITION MODE on the cluster. One key turn on. but both of them crank the car. I also heard some harsh crank sound right before engine start during this day.

Next day, I went to car in the morning, and it is only crank but not start.


I attached 2 pdf files INPA error codes. One of them before deleting. the other one after deleting error codes and crank it a couple of times.


So please, I need really help guys.

EDIT ERROR CODES :

E R R O R M E M O R Y -----------------------
Date: 27.03.2024 13:30:07 Model: E60 Scope: all control module JobStatus: OKAY Quantity: 29 -----------------------------------------------------------------

00 ZGM OKAY 1 Error stored

93BD 21

01 SIM/SGM OKAY 1 Error stored

93B2 E0


12 DME/DDE OKAY 7 Error stored

2A87 88
2AAC 08
2E98 04
2A99 81
29D1 84
2DED 08
2F44 48

18 EGS OKAY 1 Error stored
CF1F 24

19 VGSG OKAY 4 Error stored

5463 38
54C6 71
55C3 28
55C6 28

20 RDC OKAY 2 Error stored

604E E0
6053 E0

29 DSC OKAY 6 Error stored
5F12 E0
5E24 E0
5EBA A0
5F3A A0
5E22 E0
5E52 E0

40 CAS OKAY 4 Error stored

A0B5 64
A16 62
A0B0 21
A17 61

41 DWA OKAY 1 Error stored

D947 64

50 SINE OKAY 5 Error stored
9D44 11
9D44 11
9D44 11
9D47 11
9D44 11

60 KOMBI OKAY 4 Error stored
A3B2 20
A559 20
A3C3 20
E107 24

65 BZM/SZM OKAY 1 Error stored
9FEB 20

67 ZBE OKAY 1 Error stored
E2C7 20

70 LM OKAY 6 Error stored
A8C0 24
A8BC 64
A8B6 64
A8AE 64
A8AD 24
A8AC 64

72 KBM OKAY 4 Error stored
A418 20
A419 20
A448 20
A449 20

78 KLIMA OKAY 1 Error stored
9C55 64

[iskoT]

Now new challenge on Ignition on but no crank no start. Situation changed.
I didn't do anything. 2 car keys turn on igniton but not crank.





New Error Codes :
================================================== ===============
01 SIM/SGM OKAY 1 Error stored
93B2 E0

12 DME/DDE OKAY 1 Error stored

2F44 58

20 RDC OKAY 1 Error stored

6053 E0

29 DSC OKAY 3 Error stored

5F12 E0

5E24 E0

5E22 E0

40 CAS OKAY 4 Error stored

A0B5 24

A16 22

A0B4 60

A0B0 21

70 LM OKAY 5 Error stored

A8AD 64

A8BC 64

A8AC 64

A8B6 64

A8AE 64
================================================== ===============

[iskoT]

I tried to sync EWS and CAS modules. But I got an error on inpa.
My latency settings 1.
and My Dcan cable connect 7-8 pins. But I don't know why I got this error.