Quote:
Originally Posted by DATM3
On this latest install on the M6, I actually had someone hold the turbo cooler pulled to the left while I reached down and install the connectors instead of pulling off the coolant hoses on the right side. I had minimal loss of coolant from the small hose on the top of the cooler. If you remove both coolant hoses on the right side you will lose about a gallon. I would recommend having someone hold the turbo-cooler with the coolant lines still connected while you connect the plugs for minimal if any loss of coolant. I didn't have to put in any extra coolant doing this method.
|
Man, again MUCH APPRECIATED! Since you mentioned it, could you elaborate on the turbo cooler and where exactly to hold? I apologize for the questions but I just want to be sure I have someone hold the right thing when doing this (yes, that's what she said - haha).
Thanks!