Quote:
Originally Posted by DATM3
On this latest install on the M6, I actually had someone hold the turbo cooler pulled to the left while I reached down and install the connectors instead of pulling off the coolant hoses on the right side. I had minimal loss of coolant from the small hose on the top of the cooler. If you remove both coolant hoses on the right side you will lose about a gallon. I would recommend having someone hold the turbo-cooler with the coolant lines still connected while you connect the plugs for minimal if any loss of coolant. I didn't have to put in any extra coolant doing this method.
|
Thanks for the write up! Actually did the JB4 today at my office warehouse. Any chance you want to help me out with the BCM install haha!
