Quote:
Originally Posted by lannypoffo
|
So continuing with that theme, if i shine a light and find the satellite connector on top block.. every instruction Ive ever seen shows the satellite goes into bottom block under wire #1 output and wire #2 input. (see the last diagram on that instruction page)
That will mean on the top half of lower block I will move all wires one spot to the right to free up slot #1.
On the bottom half of lower block, I will move the wire in slot #2 to the right one slot, thus freeing up slot #2 for the other satellite wire.
I'll probably try that tomorrow after work. I guess people have said as long as the radio starts up properly then I should have the fiber correct.