BMW Garage | BMW Meets | Register | Today's Posts | Search |
02-04-2012, 09:07 AM | #1 |
New Member
0
Rep 11
Posts |
Staggard wheels on e60 535xi?
Hello All,
Can you run staggard wheels on an x-drive car? Also, can anyone recommend a setup with 19" wheels they use that has a nice flush fit? I'm thinking about the MORR wheels or GTS-AV .... Not too sure what really looks good on the e60 Any recommendations without breaking the bank? |
02-05-2012, 02:14 PM | #2 |
New Member
0
Rep 19
Posts |
Yes, you can run a staggered set up on a 535xi. It's available as an option from BMW. Just need to be sure the wheel diameter is equal (or close to) front to back.
The factory offset is +47, but you can get down to the low 30's depending on wheel width for a more flush fit. The consensus 19 inch set up is 8.5 front (245/35/19) and 9.5 rear (275/30/19). Anyway, check on 5series.net and run a search. There is TONS of information on different set-ups, vendors, pics, etc. Good Luck. |
Appreciate
0
|
06-01-2012, 12:44 AM | #4 | |
New Member
0
Rep 19
Posts |
Quote:
18x8 +43 245/40/18 18x9 +54 275/35/18 VMR has 19x8.5 +35, 19x9.5 +45. That works for XIs |
|
Appreciate
0
|
12-12-2012, 08:58 PM | #5 |
New Member
0
Rep 9
Posts |
boy am i glad i found this post...I too have a 535xi (2008) I am trying trying to use a set of TSW valencia but im trying to find the right size and fitment.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|