BMW Garage | BMW Meets | Register | Today's Posts | Search |
12-15-2010, 01:12 AM | #1 |
Registered
0
Rep 2
Posts |
CF Fabric wrap, post your pics
Hi guys, I thought I'd share what I've done after spending 10 hours on my trims using CF fabric in matt black that I got from PYSpeed. I think the material is easy to work with as it's quite stretchy. I think it makes the interior look classy and feel soft since it's made out of cloth.
The install took quite a bit of patience and number hours, especially it was my first time doing it. Here are some pics I took using my phone this morning. In one of the pics, you can see how I tucked and glued the fabric edged around the back of the panels. I found this is an effective way to avoid exposed edge from overcuts and stretch marks around corner edges. I was considering to do the matt silver to add a bit of contrast to my interior, but I ended up with matt black instead. The options are here on their site: *http://www.pyspeed.com/product-p/rd-8001.htm Post your installed CF fabric pics here if you have em Last edited by samsneed; 12-15-2010 at 01:25 AM.. |
Post Reply |
Bookmarks |
|
|